Building electricity according to DIN_1200x810px.jpg

A-V-E 1 Site power distributor

Categories:

CEE site power distributor

CEE site power distribution cabinets

Power combination units

SKU:

61831

Connection distributor end distributor cabinet (A-V-E 1)

Entrance
M63 cable entry with strain relief up to max. 50 mm²
Fuse protection Connection:
1× NH00 fuse switch-disconnector with 100 A with clamp terminals 10-50mm²
Output
1x CEE socket 400 V, 63 A, 5-pin
2x CEE sockets 400 V, 32 A, 5-pin
3x CEE sockets 400 V, 16 A, 5-pin
6x 230 V, 16 A socket outlets with earthing contact
Fuse protection outputs
1x miniature circuit-breaker 3P 80A with thermal-magnetic release
1x RCD 63 A, 4-pole, 300 mA, type B all-current sensitive
1x RCD 63 A, 4-pole, 30 mA, type B all-current sensitive
1x LS D 50 A, 3-pole
1x LS C 50 A, 3-pole
2x LS C 32 A, 3-pole
3x LS C 16 A, 3-pole
6x LS C 16 A, 1-pole
Site power distributor in sturdy steel cabinet with heavy metal-free plastic coating in blue
Lockable single door with spring latch bolt for padlock and recessed handle
With side transport handles, two crane eyes at the top, strain relief rail, fastening lugs for ground pegs and earthing screw
DS counter space in accordance with DIN 43870/2 available: Delivery without meter
IP44: with door closed, IP21: with door open

Opis

DIN VDE 0100-704 Standard amendment 2018:

From 2020, the new standard must be met at the start of the construction site or if the power distribution is changed during the construction site period.
On 18 May 2021 the version of the old standard ends, i.e. until then all distributors must be replaced become.
All our site power distribution boards comply with the DIN VDE 0100-704 user standard, so you are on the safe side.

Versions

Connection distributor end distributor cabinet	PU	Item no.
A-V-E 1 55 kVA	1	61831

Details

Security
tested according to DIN EN 61439 Compliant with DIN VDE 0100-704 DS counter location after DIN 43870/2

Technical data
55 kVA

Use

DIN VDE 0100-704 Amendment to standard 2018Are you up to date?

From 2020, the new standard must be complied with at the start of the construction site or if the power distribution is changed during the construction site period. All our construction site power distribution boards comply with the DIN VDE 0100-704 user standard, so you are on the safe side.

Section no. 704.531.3 says:
" Three-phase sockets up to and including 63A must be protected with a type B residual current device (RCD) in accordance with EN 62423."

Section no. 704.537.101 also states:
"Permanently connected building site power distributors with sockets must contain devices for disconnecting the power supply that can be locked against switching on and can be used by laypersons. A lockable enclosure is not sufficient."

The version of the old standard ends on 18 May 2021, i.e. all distributors must be replaced by then.